Big Sale Is On - UPDATED 03-26-26

The Big Sale is on but not like originally planned, it is a by appointment type of thing now. Be sure to call before you come to make sure the day isn't already full with peeps scheduled to come in, and make sure what you want is still available.

What's everybody doing?

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
20 Oct 2026 19:07 #19182 by Geno
Replied by Geno on topic What's everybody doing?
Yesterday was getting a complete exam in the next town over where I do most of my business, banking, groc shopping, etc and getting set up with a new chiropractor in the Humana network that's doing my Medicare stuff.  That all went well and I love the new Chiro place.

Our wise pain in the butt Governor closed most of the DMV's in the State years ago and now a lot of peeps have to travel (like me) to get a licensed renewed.  I tried to make an appt beginning of this month and everyone was already booked.  Way too many of them were closed and now it's a real mess...  You can get it done by walk in, 1st come 1st served.  Went to the closest DMV to get my license renewed early this morning and got right in but the eye test thingy was flashing and doing some weird stuff.  Because of that I couldn't get my license renewed.     Now I have to get a mandatory vision test done at some eye doctor place, (thanks to our wise pain in the but governor as well starting last year)..  I went to 4 eye places in that town and they were all booked up until after my license expired this month, some till next year.  I found a slot at Frankfort Regional Medical Center (in the Capital) and have an appt there this Thurs.  I may go downtown to the license center there and try my luck after that exam if all goes well...

After that I have another appt with the Chiro peeps this Friday.  Not having a lot of time to work from running around doing all the stuff that has to be done this month.  There's also all the changes due to the Medicare that I started on Oct 1st and getting preferred peeps in the Humana network to do all this stuff.  I'll be so glad when this is all over and things get back to normal.  

 

Welcome to the Stables!

Please Log in to join the conversation.

  • nappypappy
  • Offline
  • Super Moderator
  • Super Moderator
    Registered
  • poor and in need of a cab..
More
21 Oct 2026 09:05 #19183 by nappypappy
Replied by nappypappy on topic What's everybody doing?
Yes he is a pain in the butt and good luck with the eye tests.

520-H
You can lead a horse to water but you can't make him drink.
I can't see the forest for the trees.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
21 Oct 2026 18:38 - 21 Oct 2026 18:43 #19185 by Geno
Replied by Geno on topic What's everybody doing?
Thanks Nappy.  

Today was a super nice day after it warmed up after lunch.  I fixed one of the induction heater coils this morning.  It's just 10 gauge copper wire with insulation over it to keep the wire from touching what you're heating up and keeping the magnetic field working.  I can actually make my own now that I know how it's made.  I ordered 70 feet of high temp covering last week to fix the ones I have from now on.  Total repair bill on the one I fixed this morning was less than .25 cents , a lot better than $10 for a new one.

I also did a lot of parts clean up, blasting, pulling broken bolts out of a few things, putting more things away, and labeling more bins in the back this morning.  There were 7 more Onan coil triggers that had to be done manually in case the steam does damage to the electronics in them.   My neighbor came up after lunch and steam cleaned one of the 2 carts ready for steaming while I did more blasting.  I was only around 1-2 days from getting caught up on most of the blasting but now I have another cart to do.  Oh well, I can't complain with the hundreds of more good parts that will be around here.  

 

Welcome to the Stables!
Last edit: 21 Oct 2026 18:43 by Geno.
The following user(s) said Thank You: nappypappy

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
23 Oct 2026 18:52 #19188 by Geno
Replied by Geno on topic What's everybody doing?
I am officially drowning in things to blast + put away but most of it from the recent parting is steam cleaned..  

The first pic is from before today that was steamed but hasn't been blasted yet.  The other pics are from today.  It all needs to be inspected again and some small details cleaned up but most of it is really good + clean.  

 

Welcome to the Stables!
The following user(s) said Thank You: nappypappy

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
24 Oct 2026 18:39 - 24 Oct 2026 18:45 #19189 by Geno
Replied by Geno on topic What's everybody doing?
I cleared off the bench of most of the blasted parts and started doing the same old thing as usual, adding more parts and being an even more extreme Wheel Horse parts capital of the world.  

My neighbor didn't feel good again today so I had another day to catch up on blasting + organizing more parts.  It takes a long long time to check and totally degrease all these small parts, then blast and organize them so they can be put in the back in the engine section of Fastenal drawers.  I spent all day doing what's in the pics below and still have more to do.  The small parts take the longest so I'm getting them out of the way first.

I started off with the governor stuff hoping to get it all done to put away first. There were so many things in ice cream and other buckets, and on the rolling 3 shelf carts I gathered up from all over I thought I had found it all.  BTW, how many governor arms is a person allowed to have?    Then I found another bucket of small parts, and a large mag tray on the bench I had missed.  I'm sure if I look around there are more buckets around here like that one...  

There are already places in the back engine section that have many more of these parts organized back there in Fastenal drawers but I just can't throw away good parts.  I think the biggest reason I keep everything is so many of these parts aren't made any more I have to keep all I can that is good.  Either that or I'm just a hoarder lol.  

Either way if I need anything at all it is here, no need to try to find or order any parts which is really nice.  

 

Welcome to the Stables!
Last edit: 24 Oct 2026 18:45 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
26 Oct 2026 18:42 - 26 Oct 2026 18:44 #19190 by Geno
Replied by Geno on topic What's everybody doing?
Nothing new here, just parting stuff out and blasting...  

Been going to the new Chiropractor a few times a week lately and getting straightened out again after a year of not going.  Everything sure feels a lot better now but will prob have to do twice a week for a few more weeks to get it perfect again.  I've been going to a chiropractor for over 30 years now so at least there's no permanent damage.  After this I'll be back to normal, until I mess it up again that is...  

We finished the 1st Lawn Ranger and it came apart the hard way, especially the rear wheels, so it took most of the afternoon.  All that's left is the motor + trans.  Good thing is we saved every part including the rear wheels and dozer blade mount.  The last round hood in the lot is in the shop for tomorrow.  The round hoods only spent 1 Winter outside so I really wanted them done and inside before this Winter.  

Everything on the big bench minus the mag tray was all blasted today.  The pics are the same as the last ones, just a lot more parts added to the piles, and a few more piles like the small block arms, springs, special bolts etc.    

 

Welcome to the Stables!
Last edit: 26 Oct 2026 18:44 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
27 Oct 2026 18:35 #19191 by Geno
Replied by Geno on topic What's everybody doing?
Getting a little deeper into the organizing part of things, I really have no choice at this point with all the extra parts.  I started working in the Fastenal drawers in the engine parts rack.  A lot of space was taken up by Kohler boxes so they are going away.  The 3 breather kits took up 3/4 of a drawer when boxed.  If I just kept the top with the info on it all 3 kits fit into one little space in the back of a drawer with room left over.  They took up a little more space than 1/2 of 1 box.  That made a lot of room for other things in the Kohler breather drawer.  

The governor parts drawers turned out perfect.  I still have to get the rest of the NOS kohler stuff in there but there's plenty of room.  I found an old Cool Whip container with more nasty parts to clean up and blast sitting back there where it didn't belong so I have to do those parts.  I'm sure there are more things like that scattered all over the shop but I'll find it all eventually...  

Next up is organizing a Kohler fuel small parts control drawer.  If it controls fuel, minus carb, fuel pumps, cables, etc, it will go in that drawer, choke parts included. There are already plenty of drawers for the other bigger Kohler fuel stuff back there.   

 

Welcome to the Stables!
The following user(s) said Thank You: nappypappy

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
29 Oct 2026 18:52 #19192 by Geno
Replied by Geno on topic What's everybody doing?
The last 2 round hoods were finished up today.  Every part is apart and down as far as it will go minus pressing off 1 steering wheel.  The transmissions also have all of the pulleys and hubs off and are up on the pallet racks on another pallet full of the cast iron round hood transmissions.  Every part was saved, all 4 rear wheels on them were also saved which is usually the hardest part to get off of one of these.  

Most of the saving parts and making life easier is because of the induction heater in the last pic.  I need to make a post on it in the tool section.  That thing is really amazing and heats up a part fast.  I bought a little over a month ago and should have done it way sooner...   

Not sure what to do with the motor yet, something else to figure out tomorrow.  

Welcome to the Stables!
Attachments:
The following user(s) said Thank You: nappypappy

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
31 Oct 2026 18:27 - 31 Oct 2026 18:43 #19193 by Geno
Replied by Geno on topic What's everybody doing?
Someone showed up yesterday after I got back from getting my Real ID license renewed (finally) and bought my old heat pump system I had on CL.  He brought HVAC guys to check it out, it was still hooked up so peeps could see it work.  After they said all was good they pulled the outdoor unit and took it.  I got the old pad out, cleaned everything up, and put more lava rock there and it's like it was never there.  My friend Kevin that does HVAC just so happened to be coming up today so he helped me get the old blower unit out and everything capped off.  The man that bought the system is coming to pick up the blower unit Mon or Tues.  

Kevin takes out a lot of blower units and they all get scrapped.  He's gonna bring me an nice one and we'll be putting it back in where the old one was and just hooking up the strip heat so it can be used in an emergency.  The wiring is all there and the unit and labor is free so I thought why not...  

He also brought a 24 volt transformer and hooked to the old thermostat so I can still monitor temps around the place.  I did the same thing in the shop when I took the package units out.  They can all be monitored on the internet and have a lot of other info on them.  The only one that still actually works now it the one for the upstairs house unit (HAL UP) until we put another blower unit in downstairs.  A lot of you will recognize the HAL wallpaper on my downstairs tstat from the 2001 a Space Oddesy movie from way back.  One more thing off of my to do list for this year...  

 

Welcome to the Stables!
Last edit: 31 Oct 2026 18:43 by Geno.
The following user(s) said Thank You: nappypappy

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
04 Nov 2026 12:52 #19194 by Geno
Replied by Geno on topic What's everybody doing?
My neighbor had a doctor appt yesterday in Lexington and the weather was nice so yesterday was the chiropractor, groc shopping, mowing the world for maybe the last time, and doing more blasting + putting up parts.  Same ole same ole...  

He was back today and we were getting ready to organize + put more parts up on the 4 post rack/shelf when I got an idea...  He must be talking to my friend Kevin behind my back because when I say that he's saying what Kevin says, "Oh no"

Will give more details later someone just came in.
 

Welcome to the Stables!

Please Log in to join the conversation.

Time to create page: 0.129 seconds