Big Sale Is On - UPDATED 03-36-26
The Big Sale is on but not like originally planned, it is a by appointment type of thing now. Be sure to call before you come to make sure the day isn't already full with peeps scheduled to come in, and make sure what you want is still available.
Trailer Jack Bottom Fix
- Geno
-
Topic Author
- Offline
- Administrator Supporter
-
Super Users
- Wheel Horse Stables Owner
14 Aug 2024 16:08 - 14 Aug 2024 16:11 #18410
by Geno
Trailer Jack Bottom Fix was created by Geno
I know a lot of you will say we don't need this, but it may help some, so I'm putting it in here on one of mine I just did.
It's easy and a simple fix, much cheaper (free if you have a foot or wheel), and better than replacing a jack, especially if yours is made somewhere other than China...
#1 - Remove the jack. In the first pic you'll notice I had to do some cutting to get the jack out of the hole where there was so much damage.
#2 - Cut of the bad and get it as square as possible.
#3 - Clean everything up and put a wheel or foot on the bottom and mark for a new hole. Make the hole a little bigger than the hole in the foot or wheel so there are no alignment problems.
#4 - Paint and done.
The foot I bought is a Curt brand, Made in USA, and was on Amazon for under $10.00. It is here - Curt Trailer Foot - Made in USA
Easy peasy. I hope this helps someone who didn't think of it, or just thought it may be a tougher job.
It's easy and a simple fix, much cheaper (free if you have a foot or wheel), and better than replacing a jack, especially if yours is made somewhere other than China...
#1 - Remove the jack. In the first pic you'll notice I had to do some cutting to get the jack out of the hole where there was so much damage.
#2 - Cut of the bad and get it as square as possible.
#3 - Clean everything up and put a wheel or foot on the bottom and mark for a new hole. Make the hole a little bigger than the hole in the foot or wheel so there are no alignment problems.
#4 - Paint and done.
The foot I bought is a Curt brand, Made in USA, and was on Amazon for under $10.00. It is here - Curt Trailer Foot - Made in USA
Easy peasy. I hope this helps someone who didn't think of it, or just thought it may be a tougher job.
Welcome to the Stables!
Last edit: 14 Aug 2024 16:11 by Geno.
Please Log in to join the conversation.
Time to create page: 0.128 seconds